Cosmetic Glass Bottle Surface Treatment And Requirements

There are many kinds of cosmetic bottles, including cosmetic glass bottles, plastic cosmetic bottles, acrylic cosmetic bottles, aluminum cosmetic bottles and so on.

1, color difference: uniform color, in line with the prescribed color or color board seal sample range.

2, surface adhesion: vacuum bottle, lotion bottleappearance spray painting, electroplating, printing, bronzing, with 3M810 test tape cover spray printing and bronzing (silver) parts, smooth, make the cover part without bubbles, stay for 1 minute, is 45 degrees, and then quickly tear off, peel area is less than 15%

3, printing and bronzing (silver) : the font and pattern should be correct, clear and uniform, without obvious deviation, dislocation and defect; Bronzing (silver) should be complete, no leakage hot, dislocation, no obvious folding hot or sawtooth.

4. Wipe the gauze soaked in disinfection alcohol back and forth twice at the printing site, without printing decolorization and bronzing (silver) off phenomenon.

High temperature test requirements

Airless bottles and lotion pump bottles filled with clear water (the particle size of insoluble matter should not be more than 0.002mm) should be placed in an incubator +50° C ± 2° C and removed after 24h. After 2 hours of recovery at room temperature, there will be no rupture, shape change, discoloration, paste leakage, water leakage and other phenomena.

Glass bottle procurement

The uneven thickness of the glass bottle will easily lead to damage, or it is easy to be broken by the contents in cold conditions, so the reasonable capacity should be tested during filling, and the paper should be held and separated individually in transportation. The color box should be equipped with the product, and the inner tray and the middle box can be used to prevent vibration.

Appearance quality requirements

1. Cleanliness: clean inside and outside, no free pollution, no ink stain pollution.

2. Outer packing: the packing cartons shall not be dirty or damaged, and the boxes shall be lined with plastic protective bags. The bottles and covers that are easy to be scratched shall be packed to avoid scratches. Each box should be packed in fixed quantity, sealed with tape in the shape of "Gong", and mixed packing is not allowed. Each batch of shipment shall be attached with the factory inspection report, and the name, specification, quantity, production date, manufacturer and other contents of the outer box identification must be clearly identifiable.

Beyaqi has modern workshop, high precision molding injection molding machine, automatic injection molding production line and other advanced machinery and equipment. The main production powder box, eyelash bottle, lip gloss tube, eyeliner bottle, powder, eyeshadow and other makeup products.