Views: 335 Author: Site Editor Publish Time: 2022-06-10 Origin: Site
1. Hold the lotion pump nozzleof the bottle with your hand and rotate the lotion pump head counterclockwise (from the top down).
2. Normally, if you hear a "boom" and see the pump head pop up, and the pump head can be squeezed down and squeezed out, you can open the bottle successfully and use the body lotion pump.
3. If you find that the tighter you rotate the bottle, it means that the bottle is designed to rotate the switch in the opposite direction. That is, you need to turn it clockwise to open.
The pump head is based on the principle of pressurized suction, which uses the movement of the piston to expel the air present in the storage cylinder, resulting in internal and external air pressure, so that the liquid rises under the action of air pressure and is discharged from the discharge tube to the outside of the tube.
Some shampoo lotion pump in the beginning will be designed in the middle of the liquid outlet and the following round cover a lotion pump clip lock, which is used to play a fixed role to prevent the pump head rotate during transport and produce leakage. At this time, you only need to remove the plastic clip lock, you can rotate the pump head.
In order to prevent leakage due to mutual extrusion during transportation, this pump head can only squeeze out liquid after Twisting Lotion Pump, almost avoiding the problem of leakage. It is convenient to control the amount of each use.
1. The kind of pressurized body shampoo/body lotion pump you just bought needs to be rotated clockwise or counterclockwise so that it will automatically pop up. If the rotation does not pop up, the pressure may be broken, you need to change a pressure head.
2. Body lotion to the last only a little bit left when the press can not come out. The tube is relatively thin pressure is not enough. This is upside down, take a new thing then, take the pump head off.
3. When the weather is very cold, there may also be some pressure squeezing out.
English